The Cyber-shot <DSC-FX77> can exchange images with a VAIO equipped with the Basic Imaging Profile (BIP)-compatible BluetoothTM function.
Before you use the function, you need to download Network Smart Capture to your VAIO. For details on downloading the software, refer to the following website:http://www.vaio-link.com/

Using the Cyber-shot as the remote camera of a SONY VAIO
Sending images to the SONY VAIO from the Cyber-shot
Sending images to the Cyber-shot from the SONY VAIO
Authentication

Sending images to the Cyber-shot from the SONY VAIO


You can send images saved on the Basic Imaging Profile (BIP)-compatible VAIO to the Cyber-shot.

Cyber-shot_DSC-FX77

Tips
• Design and specifications of the SONY VAIO are subject to change without notice.
• The screens and buttons displayed may differ depending on the VAIO and the software used.
• When [SECURITY LEVEL] of the camera is set to [HIGH], passkey entry may be required.


PAGETOP
Setting the Cyber-shot to be connectable

  1. Set the MODE dial on the Cyber-shot to .


  3. Press BluetoothTM button on the Cyber-shot.


  4. The BluetoothTM menu appears.

    <Cyber-shot>
    Cyber-shot_receiving menu


  5. Select [RECEIVE] with left / right of the control button, then press Circle arrow.


  6. The BluetoothTM function starts up and "WAITING FOR CONNECTION" is indicated. The Cyber-shot is then connectable.

    <Cyber-shot>
    Cyber-shot_Waiting for connection


PAGETOP
Sending images to the Cyber-shot

  1. Turn on the VAIO and turn on the BluetoothTM function.


  3. Double-click BlueSpace icon on the task tray.


  4. "BlueSpace" starts and the main screen appears.

    <VAIO: BlueSpace>
    VAIO_BlueSpace mainscreen

  5. Click (the Device Discovery button) on the left side of she screen.

    The VAIO searches for BluetoothTM devices in the vicinity. When the device discovery operation is completed, a connectable BluetoothTM device(s) is displayed in blue on the right side of the screen.

    <VAIO: BlueSpace>
    VAIO_BlueSpace Device Discovery


  7. Move the device you want to connect in the center with Upper arrow / Lower arrow .

    Select the desired Cyber-shot based on the name and the device address.

    <VAIO: BlueSpace>
    VAIO_BlueSpace move the device in the center

  8. Click (the Service Discovery button) on the right side of the screen.


  9. Available services are searched for, and the available service button(s) located in the center of the screen begin to flash to indicate which services are available.

    <VAIO: BlueSpace>
    VAIO_BlueSpace Service Discovery

    Tips
    • If passkey entry is required on the Cyber-shot and the VAIO, enter the passkey.
    • If you run past the time limit for the passkey entry (30 seconds), repeat Step 5 to connect.

  10. Click (the Imaging button) the second button from the bottom in the column in the center of the screen.


  11. The following screen appears on the VAIO.

    <VAIO>
    VAIO_Select the image you want to send

  12. Select the image you want to send, then click [Open].


  13. Image transfer starts.

    <VAIO>
    VAIO_Sending window

    Tips
    If you select more images and click [Open], you can select more images at once.

    When the images have been sent from the VAIO, [RECEIVED] is indicated on the screen of the Cyber-shot.

    <Cyber-shot>
    Cyber-shot_Received

  14. Select [EXIT] on the screen of the Cyber-shot, and then press Circle arrow of the control button.


  15. The image received by the Cyber-shot is displayed automatically.
    When more images are received, the image received last is displayed.

    Tips
    • Once the connection is mode, Steps 3 and 5 are not required.

PAGETOP